⇒ How do I tell if my beer fermented properly? (I really want to drink it)

Monday, June 20, 2022

How to tell if my beer brew has fermented?

Fermentation is the name of the game when making beer.

If you don't have fermentation taking place, you simply don't have beer.

You have just have a 23 liter bucket of watery malt.

Homebrewers can face fermentation stage issues and a common problem is that fermentation has not begun. A typical sign is that there are no bubbles coming through the airlock.

how to tell if beer fermented

But is no bubbles in the airlock really a sign of a lack of fermentation?


The first thing to bear in mind is that it can take at least 15 hours of your Earth time before the CO2 bubbles start gurgling through the airlock. 

So don't go drowning your sorrows just yet if the bubbles haven't started. If you think that your beer hasn't started brewing there's some problem-solving you can do. 

If you are using a glass fermenter you can look for a dark scum that rings around the water level mark. You can probably see it through the standard white fermenter drum as well.

Or check for signs of foam or the krausen as it is affectionately known. Give it 20 - 48 hours before you start to worry.

If using a plastic drum you might be able to see through to check for the scum. Another trick is to take out the airlock and try and peek through the whole to identify scum or foam.

Also, did you firmly seal your fermenter? If not, the CO2 is possibly passing out via the lid and not the airlock meaning the pressure build-up is not sufficient for gas to pass out the water trap.

We're going to assume your fermenter is in a warm place and not in some shed where the temperatures are approaching zero degrees centigrade. Your yeast will go to sleep if this is the case.

You could also check the gravity by using a hydrometer.

I'll assume you know how to use one.  The beer has usually finished fermenting if the final gravity reading is  1/3 to 1/4 of the original gravity. This, of course, means you took an original reading when you first prepared your beer.

You did do that right?

If you have the same reading 24 hours apart - that's your final reading and an indication that the fermentation is finished. 

Don't bottle your beer just yet, let it mellow for a bit longer.

The longer the better your brew will probably be. If you are a beginner brewer, trust me on this. Let you brew rest up just a little bit longer than you may have the patience for.

Brewing is a game of patience, and those who wait are rewarded with good-tasting, clear beer

So why weren't there any bubbles in the airlock? 

That's a fair question to ask.

It could be that there was a leak that allows the CO2 to escape (to teach you to suck rotten eggs, those bubbles in the airlock are carbon dioxide gas, the by-product of fermentation).

You may have not tightened the drum enough or possible not screwed in the tap properly.

It's a good idea to check this is the case before you worry too much.
  • If you didn't see any signs of fermentation it could be that it's too cold to brew.
  • Is your batch of beer in a warm enough place?
  • If you're brewing during summer months, it's probably not too cold.
If you've left your beer in a cold place in the shed, then it may be too cold. If it's too cold to brew in your 'man shed' - say it's the middle of winter, you might want to bring your brew inside the house.

You could consider wrapping it in blankets or old sheets (I do this all the time just because that's what I learned to do at University in the cold, windy town of Palmerston North, NZ. This is a handy trick and will help to keep the chill off your beer. I think this trick works best if the beer is already warm enough to brew. 

Maybe leave it in the laundry if it's a warm place?

When I brew in winter I will often leave the fermenter our the warm kitchen or living room at least overnight so that the fermentation process has a decent chance to start. My wife hates that but still drinks the beer so go figure. 

Some brewers like to use heat pads (try the Mangogrove Jacks one) or panels to keep the beer at a consistently warm temperature. If you do wish to use a pad, you'll need to be able to store your brew close to a power socket so the heat pad can operate.

Yeast issues?

Another more serious reason for beer failing to ferment is yeast failure.

This may occur if the yeast has become dry. This is why you will hear a constant refrain from expert beer users to only use fresh ingredients.

In the case of a beer kit brewer, this means do not purchase old stock as the yeast could be too old (I do suspect however this is a bit of a housewives tale - as stock should rotate fairly regularly). 

However, in our experience, we haven't had this problem with a beer kit yet. 

A key trick is to add (pitch) the yeast at the appropriate temperature - if using a beer kit you will be well off to generally follow the temp instructions - you especially do not want to add the yeast if the solution is too cold as it may be hard for the yeast to get traction - and whatever you do, don't add yeast to boiling water (if that's what you are using to mix everything together) - as that will almost certainly kill the yeast and ruin any chance of your beer successfully fermenting.

So in summary here are some problem-solving tips:
  • Check for leaks that allow the CO2 to escape - tighten the fermenter drum
  • Look for foamy residue - if you see it, you're OK
  • Look for scum residue - if you see it, you're OK
  • Make sure the temperature is appropriate for the kind of beer you are making
  • Consider using a heat pad to ensure a consistent brewing temperature
Image credit to Quinn Dombrowski via Creative Commons Licence

1 comment:

  1. Hi... trying again as not sure if post posted!
    I added 200g extra DME to fern. Bin after 24 hrs fermentation... the mix frothed but I contained it and only spilled a little amount; then I added half teaspoon extra yeast to try and compensate... original batch had yeast nutrients, ... have I totally messed up or are these kits at all forgiving? I still have foam pressing against lid... any suggestions please? Thanks, Ian

    ReplyDelete

Powered by Blogger.

Tags

absorption caps abv acetaldehyde acid adjuncts advice about beer brewing aeration aeration kit aging air lock alcohol alcohol poisoning ale ale beer kits alkaline alkaline brewery wash all grain american amylase apera apples attenuation autolysis automatic temperature compensation bacteria baker's yeast baking yeast ball lock ball valve bar keepers friend barley batch prime beer brewing beer capper beer dispenser beer filtration kit system beer gushers beer kit beer kit review beer kits beer lines beer salt beer taps beerstone best brewing equipment biotin bittering BKF black rock bleach blichmann blow off tubing bluelab bohemian pilsner boil in a bag boil over boneface bottle cap bottle caps bottle conditioning bottling bottling beer bottling spigot bourbon brettanomyces brew and review brew day brewing beer guide brewing salts brewing spoon brewing sugar brewing thermostat brewzilla british thermal unit brix brix scale BTU budvar buffer buffer solution burton snatch buyer's guide calcium chloride calcium sulphate calibration calibration probe calibration solution campden tablets capping carbon dioxide carbonation carbonation drops carboy cascade caustic soda cherry wine chinook chlorine christmas chronicle cider clarity cleaning your equipment clear beer clone recipe cloudy beer cold crashing coldbreak conditioning tablets conductivity conical fermenter contamination coopers copper tun corn sugar cornelius corny keg craft beer creamy beer crown cryo hops cubes danstar nottingham demijohn dextrose distilation DIY DME dopplebock draught dry hopping dry malt extract edelmetall brü burner eisbock ekuanot electrode enhancer enzyme equipment ester ethanol experiments in beer making faucet fermcap-s fermentables fermentation fermenter fermentis fermentor final gravity finings five star flat beer floccing foam inhibitor force carbonation french fresh wort pack fridge fruit fusel alchohol garage project gas burners gelatin gift and present ideas gin ginger beer glucose golden ale golden syrup goldings gose grain grain mill green bullet grist guinness gypsum hach hacks hallertauer heat mat heat pad heat wrap home brew honey hop schedule hops hops spider how not to brew beer how to brew that first beer how to brew with a beer kit how to grow hops how to make a hop tea how to wash yeast hydrated layer hydrogen sulfide hydrometer IBU ideas idophor infection inkbird instruments isoamyl acetate jelly beans jockey box john palmer juniper keezer keg cooler keg regulators kegco kegerator kegging kegs kettle kombucha krausen lactic acid lager lagering lauter lion brown liquid malt extract litmus LME lupulin lupulin powder lupuLN2 making beer malic acid malt malt mill maltodextrin mangrove jack's maple syrup mash mash paddle mash tun mccashins mead methanol micro brewing milling milwaukee MW102 mistakes mixing instructions moa mouth feel muntons must nano brewing New Zealand Brewer's Series no rinse nut brown ale oak oak wood chips off flavors original gravity oxygen pacific gem palaeo water pale ale panhead parsnip PBW pear pectine pectolase perlick ph levels ph meter ph pen pH strips ph tester pico brewing pilsner pitching yeast plastic drum poppet valve pot powdered brewing wash ppm precipitated chalk pressure relief valve priming prison hooch probe problem solving propane and propane accessories pruno pump system purity law radler re-using yeast recipe record keeping reddit refractometer reinheitsgebot removing beer labels from bottles review rice hulls riwaka rotten eggs saaz saccharomyces cerevisiae salt sanitization secondary regulator sediment seltzer session beer silicon simple tricks for brewing siphon site glass skunked beer small batch brewing soda soda ash soda stream sodium carbonate sodium carbonate peroxyhydrate sodium hydroxide sodium metasilicate sodium percarbonate sour beer sparge spigot spirals spirits spoon spraymalt star san starch STC-1000 steinlager steralisation sterilisation sterilization sterliization still stoke storage solution stout sucrose sugar supercharger tannins temperature temperature controller therminator thermometer tips for beginners tri-sodium phopsphate tricks and tips trub tubing tui turkey vodka infused gin vorlauf water water testing wet cardboard taste wet hopping weta whirlfloc tablets white claw williamswarn wine winter brewing wood wort wort chiller yeast yeast energizer yeast nutrient yeast rafts yeast starter yeast traps zinc
Back to Top